Large and Small Foam Generator Sales – Foamed Concrete Specialists - Propump Engineering Ltd

Large and Small Foam Generator Sales

Large Auto Batch foam generator

Brochure

Junior foam generator

Brochure


AUTO BATCH FOAM GENERATOR 500

Foam generators are used to produce a high density foam of the same type used by our commercial in-line foam concrete pumping systems. These small, air driven foam generators can be used with a wide range of concrete admixtures, however we solely use them with our Propump 26 and 40 Foam Additives. Our larger, portable foam generators have timing functions and produce up to 500 litres per minute of foam. Suitable for on-site foaming in large volumes.

Specification

  • Size:

600mm x 400mm x 250mm

  • Weight: 

30kg approx.

  • Power Consumption:

Comp Air 30cfm @ 100psi

  • Production Rate:      

400 – 500 l/min

Description and Application

  • Used for the production of volumetric batches of foamed concrete such as ready mixed trucks.
  • Manual on, auto off, with re-settable timer.
  • Variable from 1-10 minutes on easy to read analogue dial.
  • Separate suction lines for water & chemical feed.
  • Air regulator for pressure control.
  • 75mm diameter curved lance for easy placement of foam into ready mix trucks.
  • 5m lance leads and lockable steel cabinet.
  • System completely  powered by compressed air

Key Features

  • Portable form factor
  • Manual on/off
  • Separate admixture intake
  • Solid nylon pump system for long term durability.
  • Air regulator for pressure control.
  • Versatile 5 metre lance hose.
  • External lance
  • Water meter to measure production volumes
  • Accurate Kunkhe Timer

The foam quality is the same as our bigger truck system, which delivers 1000 l/min of foam.

These units were used to produce over 13,000m3 worth of foamed concrete in one continuous pour over 14 days. Three units were used and over 2,000 Ready mix Trucks attended site.

Package Contents

  • Foam generator in cabinet with carry handle
  • ¾” water suction hose with check valve and foot strainer.              2 metre length
  • ¼” Chemical suction hose with foot valve and strainer.                     2 meter length
  • Modular in-line Claw coupling
  • 1-10 minute air driven timer

Price and availability

Price £3,750.00 + VAT and delivery (where applicable).


Availability; ex-stock


JUNIOR FOAM GENERATOR JFG 200

Portable Junior foam generators are used to produce a high density foam of the same type used by our commercial in-line foam concrete pumping systems. These small, air driven foam generators can be used with a wide range of concrete admixtures, however we solely use them with our Propump 26 and 40 Foam Additives. They use a robust aluminium air driven pump and make use of a pre-diluted solution of water and foaming agent. The Junior foam generator makes use of an internal foam lance expansion chamber to make point of delivery of foam lightweight and easy.

Specification

  • Size:

400mm x 300mm x 200mm

  • Weight: 

15kg approx.

  • Power Consumption:

Comp Air 15cfm @ 100psi

  • Production Rate:      

150-200 l/min

Description and Application

  • Used for the production of volumetric batches of foamed concrete.
  • Can produce foam concretes down to 300kg/m3 – 1900kg/m3.
  • Excellent for;
    • Laboratory work.
    • Testing and trials.
    • Block making.
    • Hand batching.
    • Panel production .
    • Smaller volumes.
  • System completely powered by compressed air.
  • Internal expansion lance.
  • Used on site for smaller pre-foam volumes.

Key Features

  • Small form factor
  • Manual on/off
  • No need to worry about dosing units/pumps
  • Metal pump system for long-term durability.
  • Air regulator for pressure control.
  • Versatile 40mm flexible lance.
  • Low air consumption compared to ABFG 500

The foam quality is the same as its bigger brother the ABFG500 that produces 500 l/min of foam.

There are many of these systems all over the world being used every day to provide lightweight foamed concrete panels, blocks, trench re-instatement, roofing, tunnel linings, floors, laboratory work, etc. 

Package Contents

  • Foam generator in cabinet with carry handle
  • ½” suction hose with check valve and foot strainer.          2 metre length
  • 40mm foam delivery hose with camlock fittings.
  • Modular in-line Claw coupling ball valve for manual isolation

Price and availability

Price £2,500.00 + VAT and delivery (where applicable).


Availability; ex-stock

More information

Propump Consultancy Services

Propump Engineering foamed concrete specialists site visits and consultancy services
Propump Engineering foamed concrete specialists site visits and consultancy services

Propump news & articles

Foam concrete inline production system enable the most accurate and efficient method of manufacturing foam concretes on-site
Foam concrete inline production system enable the most accurate and efficient method of manufacturing foam concretes on-site

Why choose foamed concrete?

Foamed Concrete Applications include filling of sink holes and other ground movement to support the underside of structures
Foamed concrete Applications including the use of fluid and free flowing material for the use in ground stabilisation and mass infill

Projects by Propump

Foamed concrete used for Crossrail tunnelling works, foamed concrete filling addits, tunnels and TBM machines
Foamed concrete used for Crossrail tunnelling works, foamed concrete filling addits, tunnels and TBM machines

Foamed concrete cube moulds available from stock from ProPump Engineering Ltd

Foamed concrete cube moulds

Large quantities of both 100mm and 150mm foamed concrete cube moulds are kept in stock, available to purchase on a next day delivery.

Please call the office for up to date prices on 01322 429 900 alternatively email info@propump.co.uk