Thermal insulation
The Thermal insulation value for a material is its ability to resist the flow of heat across it. The measure of this heat flow rate is known as a materials K value and the lower this value the higher the products thermal efficiency.
The table below shows that broadly speaking the K value for foamed concrete lies between 0.08w/mk at the lower densities and 0.62w/mk at the higher densities.
-
Density
400 600 800 1000 1200 1400 1600 -
W/mk
0.08 0.1 0.14 0.22 0.35 0.5 0.62
What is Foamed Concrete?
Foamed concrete is a highly air entrained sand cement or cement only slurry with greater than 20% air by volume. The air is created by the introduction of a preformed foam manufactured using Propump Engineering’s custom foaming agent (Propump 26), encapsulating bubbles of 0.3-1.5mm diameter.
The material is a lightweight, free-flowing, self-compacting, and highly insulating material. It exhibits good load bearing capacity and resistance to freeze thaw exposure. It is an extremely versatile product, which will flow through small enclosed voids such as sewers and yet when set can be tooled to provide access for services.
Find Out MoreFoamed
Concrete
Applications
With a continued policy of research and development, ProPump Engineering have designed a range of ProFoam (TM) mixes for an ever widening range of applications. Using equipment designed and manufactured in-house...
Find Out MoreProPump
UK
Services
Propump Engineering have the available resources to offer a wide range of products and services to aid in the specification, production and supply of numerous foamed concrete materials from lightweight, thermally...
Find Out MoreProPump
International
Services
Based in the UK Propump Engineering have exported foam generators, pump systems and chemicals all over the world. Our products are renowned for there simplicity and robustness with our original portable range of ...
Find Out More
